| Item | DT | Card | Conf | Description | Label |
|---|
hl7:substanceAdministration
|
| | | R | | (IPS...ent) |
| |  | | hl7ips-dataelement-104 |  Medication | CEN/TC 251 prEN 17269 |
|
 | @classCode
|
| cs | 1 … 1 | F | SBADM |
| @moodCode
|
| cs | 1 … 1 | R | If the statement refers to a prescribed medication then a <substanceAdministration> intent (moodCode='INT') is used; otherwise, to record medications which are stated to have taken, the moodCode shall be set to 'EVN'.</substanceAdministration>
|
| | CONF | | The value of @moodCode shall be drawn from value set 2.16.840.1.113883.11.20.9.18 MoodCodeEvnInt (DYNAMIC) |
|
| hl7:templateId
|
| II | 1 … 1 | M | | (IPS...ent) |
 | | @root
|
| uid | 1 … 1 | F | 2.16.840.1.113883.10.22.4.4 |
| hl7:id
|
| II | 0 … * | R | | (IPS...ent) |
| hl7:code
|
| CD.IPS | 1 … 1 | R | The <code> element is valorized with the Substance Administration ACT code "DRUG" unless it is used for asserting the known absence of medication treatments or no information about them.
| (IPS...ent) |
| | | | hl7ips-dataelement-220 | Medication Summary content status | CEN/TC 251 prEN 17269 |
|
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.14 DRUGActCode (DYNAMIC) | | or | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.79 IPS No Medications (DYNAMIC) |
|
| hl7:text
|
| ED | 0 … 1 | R | The URI given in the value attribute of the <reference> element points to an element in the narrative content that contains the complete text describing the medication.
In a CDA document, the URI given in the value attribute of the <reference> element points to an element in the narrative content that contains the complete text describing the medication.
| (IPS...ent) |
| | hl7:reference
|
| TEL | 1 … 1 | M | | (IPS...ent) |
| url | 1 … 1 | R | Reference pointing to the narrative, typically #{label}-{generated-id}, e.g. #xxx-1 |
| hl7:statusCode
|
| CS | 1 … 1 | M | | (IPS...ent) |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.12 ActStatusActiveCompletedAbortedSuspended (DYNAMIC) |
|
| | Example | <statusCode code="active"/> |
| Included | 1 … 1 | R | from 2.16.840.1.113883.10.21.9.1 UV Use Period (DYNAMIC) |
| Choice | 1 … 1 | | The effectiveTime element encodes the use period of the medication, it is always expressed as an interval of time.
It may be expressed using the low and high OR with the width element.
The first is used to indicate a specified interval (e.g. from march 15th, 2017); the latter for indicating a 'floating' period (e.g. 2 weeks). Elements to choose from:- hl7:effectiveTime[hl7:low | hl7:high][not(hl7:width)]
- hl7:effectiveTime[hl7:width][not(hl7:low|hl7:high)]
- hl7:effectiveTime[hl7:low | hl7:width][not(hl7:high)]
|
| | hl7:effectiveTime
|
| IVL_TS | 0 … 1 | C | Case 1: specified interval
The low and high values of the first effectiveTime element represent the start and stop times for the medication. The low value represents the start time, and the high value represents the stop time. If either the low or the high value is unknown, this shall be recorded by setting the nullFlavor attribute to UNK.
In case of unbounded period (continuous therapy) the high element will be valued with the nullFlavor attribute to NA.
The high value records the end of the medication regime according to the information provided in the prescription or order. For example, if the prescription is for enough medication to last 30 days, then the high value should contain a date that is 30 days later then the low value. The rationale is that a provider, seeing a prescription that has not been refilled would normally assume that the medication is no longer being taken, even if the intent of the treatment plan is to continue the medication indefinitely. | (IPS...ent) |
where [hl7:low or
[not(hl7:width)] | |
| cs | 0 … 1 | | |
| | Example | Known Interval <effectiveTime type="IVL_TS">
<low value="20130321"/> <high value="20140321"/></effectiveTime> |
| | Example | Information not available about the period <effectiveTime type="IVL_TS" nullFlavor="NI"/> |
| | Example | Unknown end date <effectiveTime type="IVL_TS">
<low value="20130321"/> <high nullFlavor="UNK"/></effectiveTime> |
| | Example | continous therapy <effectiveTime type="IVL_TS">
<low value="20130321"/> <high nullFlavor="NA"/></effectiveTime> |
| IVXB_TS | 1 … 1 | R | | (IPS...ent) |
| IVXB_TS | 0 … 1 | R | | (IPS...ent) |
| | hl7:effectiveTime
|
| IVL_TS | 0 … 1 | C | Case 2: 'floating' period:
The width element is used to specify a period of (actual or intended) administration that is not anchored to any specific date (e.g. a two weeks therapy) | (IPS...ent) |
where [hl7:width] [not(hl7:lowor
hl7:high)] | |
| | Example | 2 week period <effectiveTime type="IVL_TS">
<width value="2" unit="w"/></effectiveTime> |
| | | NP | | (IPS...ent) |
| | | NP | | (IPS...ent) |
| | | NP | | (IPS...ent) |
| PQ | 1 … 1 | R | | (IPS...ent) |
| cs | 1 … 1 | R | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.21.1 Medication Time Units (UCUM) (DYNAMIC) |
|
| | hl7:effectiveTime
|
| IVL_TS | 0 … 1 | C | Case 3: anchored period:
The width element is used to specify a period of (actual or intended) administration anchored to a specific date (e.g. a two weeks therapy starting today) | (IPS...ent) |
where [hl7:low or
[not(hl7:high)] | |
| | Example | 2 week period starting on 2013-03-21 <effectiveTime type="IVL_TS">
<low value="20130321"/> <width value="2" unit="w"/></effectiveTime> |
| IVXB_TS | 0 … 1 | C | | (IPS...ent) |
| PQ | 1 … 1 | R | | (IPS...ent) |
| cs | 1 … 1 | R | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.21.1 Medication Time Units (UCUM) (DYNAMIC) |
|
| hl7:routeCode
|
| CE.IPS | 0 … 1 | R | The <routeCode> element specifies the route of administration using the EDQM route of administration vocabulary.
A code must be specified if the route is known.
Since the EDQM Standards Terms, together with UCUM, is one of the IDMP terminologies actually available for usage, this code system has been selected as referecne terminology for representing Pharmaceutical Dose forms; Packages and Route of Administration.
It is known that also alternative jurisdictional and international terminologies are also used for this concept domain, as NCI or SNOMED CT.
Official NCI and EDQM maps for the route of administration are available from the EDQM site.
| (IPS...ent) |
| | | | hl7ips-dataelement-102 | Route of administration | CEN/TC 251 prEN 17269 |
|
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.33 IPS Medicine Route of Administration (DYNAMIC) |
|
| hl7:doseQuantity
|
| IVL_PQ | | NP | | (IPS...ent) |
| hl7:rateQuantity
|
| IVL_PQ | | NP | | (IPS...ent) |
| hl7:administrationUnitCode
|
| CE | | NP | | (IPS...ent) |
| hl7:consumable
|
| | 1 … 1 | M | | (IPS...ent) |
| | @typeCode
|
| cs | 1 … 1 | F | CSM |
| Included | | | from 2.16.840.1.113883.10.22.4.2 IPS Medication Information (detail) (DYNAMIC) |
| | hl7:manufacturedProduct
|
| | 0 … * | R | | (IPS...ent) |
| | | | hl7ips-dataelement-2 | Medicinal Product | CEN/TC 251 prEN 17269 |
|
| cs | 0 … 1 | F | MANU |
| II | 1 … 1 | M | | (IPS...ent) |
| uid | 1 … 1 | F | 2.16.840.1.113883.10.22.4.2 |
| Included | 1 … 1 | R | from 2.16.840.1.113883.10.22.4.3 IPS Manufactured Material (DYNAMIC) |
| | | hl7:manufacturedMaterial
|
| | 1 … 1 | R | | (IPS...ent) |
| cs | 0 … 1 | F | MMAT |
| cs | 0 … 1 | F | KIND |
| II | 1 … 1 | M | | (IPS...ent) |
| oid | 1 … 1 | F | 2.16.840.1.113883.10.22.4.3 |
| Choice | 0 … 1 | | Elements to choose from:- hl7:code
- hl7:code[@codeSystem='2.16.840.1.113883.6.96']
|
| CE.IPS | 0 … 1 | R | This element is generally used to identify a medicinal product.
When the IDMP identifiers will be concretely available for usage this element will be used for conveying the Medicinal Product Identifier (MPID).
For the time being, it could be optionally used for conveying jurisdictional or agreed cross jurisdictional medicinal product code. | (IPS...ent) |
| | | | hl7ips-dataelement-105 | Product Code | CEN/TC 251 prEN 17269 |
|
| CE.IPS | 0 … 1 | R | Non IDMP codes from SNOMED CT value set | (IPS...ent) |
| where [@codeSystem='2.16.840.1.113883.6.96'] | |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.71 IPS Medications Products (DYNAMIC) |
|
| EN | 0 … 1 | R | This element is supposed to be valorized with the complete Medicinal Product Name as approved by the Medicines Regulatory Agency in a jurisdiction.
The name may be applicable in one or more country/language combinations.
| (IPS...ent) |
| | | | hl7ips-dataelement-117 | Brand Name | CEN/TC 251 prEN 17269 | | hl7ips-dataelement-171 | Product Common Name (and Strength) | CEN/TC 251 prEN 17269 |
|
| CE.IPS | 0 … 1 | R | Administrable Pharmaceutical Dose Form.
This code represents the form of the medication (e.g. tablet, capsule, liquid)
Since the EDQM Standards Terms, together with UCUM, is one of the IDMP terminologies actually available for usage, this code system has been selected as referecne terminology for representing Pharmaceutical Dose forms;Pakages and Route of Administration.
It is known that also alternative jurisdictional and international terminologies are known to be used for this concept domain, as NCI or SNOMED CT.
| (IPS...ent) |
| | | | hl7ips-dataelement-227 | Pharmaceutical dose form | CEN/TC 251 prEN 17269 |
|
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.25 IPS Medicine Doseform (DYNAMIC) |
|
| | Example | <formCode code="10211000" codeSystem="0.4.0.127.0.16.1.1.2.1" codeSystemName="EDQM" displayName="Capsule, soft">...</formCode> |
| | 0 … * | | This structure describes the packaging of the medication.
The <pharm:formCode> element provides the code for the particular package.
If the package has a brand name, it can be described in the <pharm:name> element.
The <pharm:capacityQuantity> element describes the capacity of the packaging, while the <pharm:quantity> the actual quantity of inner packaged items in the outer packaging container.
The product might have a single (30 pills bottle) or multiple (5 vials 10 ml; box with 2 blisters of 20 tablets) layers of packaging.
In the latter case, the most inner (nested) item represents the most outer package item.
For example the case
\--Box
\-----2 blisters
\--------20 tablets
is described as "20 tablets" contained by "a blister"; "2 blisters" contained by one box.
The most inner package represents the Packaged Medicinal Product.
When the IDMP Packaged Medicinal Product ID (PCID) will become actually available for usage, the most inner package <code> element will be used to convey the IDMP PCID.
| (IPS...ent) |
| cs | 1 … 1 | F | CONT |
| | Example | Packaged Medicinal Product with multiple layers packaging <asContent>
<containerPackagedProduct>
<!-- Inner Package -->
<code codeSystem="..." code="..." displayName="...">
<asContent>
<containerPackagedProduct>
<!-- Intermediate Package -->
<asContent>
<containerPackagedProduct>
<!-- Outer Package / Packaged Medicinal Product -->
</containerPackagedProduct> </asContent> </containerPackagedProduct> </asContent> </code> </containerPackagedProduct></asContent> |
| | Example | Packaged Medicinal Product with formCode <asContent>
<containerPackagedProduct>
<!-- Packaged Medicinal Product -->
<code codeSystem="1.999.999" code="PC_ID" displayName="Packaged Product Name">
<name>100 MIRACLE PILLS(TM)</name> <formCode codeSystem="0.4.0.127.0.16.1.1.2.1" code="30009000" displayName="Box" CodeSystemName="EDQM"/> </code> </containerPackagedProduct></asContent> |
| PQ | 0 … 1 | | The quantity which specified how many inner packaged content entities are in an outer packaging container entity.
| (IPS...ent) |
| cs | 0 … 1 | | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.28 Quantity Units (DYNAMIC) |
|
| | 1 … 1 | R | |
| | Example | <quantity value="20" unit="{tablet}"/> |
| | Example | <quantity value="10" unit="mL"/> |
| | | | | pharm:containerPackagedProduct
|
| | 1 … 1 | R | It represents the most inner Package Item or the Packaged Medicinal Product. | (IPS...ent) |
| cs | 1 … 1 | F | CONT |
| cs | 1 … 1 | F | KIND |
| | 0 … 1 | | If this is also the most outer <pharm:containerPackagedProduct> than the <code> element can be used to convey the (IDMP) Packaged Medicinal Product ID (e.g. the IDMP PCID when it will become actually available for usage).
The presence of the PCID indicates that that element represents the "Packaged Medicinal Product".
| (IPS...ent) |
| ST | 0 … 1 | | It represents the Name of the Package Item or of the Packaged Medicinal Product.
If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name.
| (IPS...ent) |
| | Example | <name>AMOXIFEN(R) 20 compresse 20 mg</name> |
| CE.IPS | 0 … 1 | R | This element encodes the type of the most inner package item or of the or the Packaged Medicinal Product.
Since the EDQM Standards Terms, together with UCUM, is one of the IDMP terminologies actually available for usage, this code system has been selected as referecne terminology for representing Pharmaceutical Dose forms; Packages and Route of Administration. | (IPS...ent) |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.27 Medicine Package (DYNAMIC) |
|
| | Example | <formCode code="30007000" codeSystem="0.4.0.127.0.16.1.1.2.1" codeSystemName="EDQM" codeSystemVersion="2010" displayName="Blister">...</formCode> |
| PQ | 0 … 1 | | It represents the functional capacity of the container: e.g. bottle containing up to 20 tablets or ampule of 10 ml. | (IPS...ent) |
| cs | 0 … 1 | | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.28 Quantity Units (DYNAMIC) |
|
| | 1 … 1 | R | |
| | 0 … * | R | In case of multiple layers of packaging (5 vials 10 ml; box with 2 blisters of 20 tablets) this element can be used for describing the intermediate Packaged Medicinal Product Item or the Packaged Medicinal Product.
For example in the case
\--Box
\-----2 blisters
\--------20 tablets
it describes the "2 blisters"
In the case of
\--Box
\-----5 vials
it represents the Packaged Medicinal Product.
| (IPS...ent) |
| cs | 1 … 1 | F | CONT |
| PQ | 0 … 1 | R | The quantity which specified how many inner packaged content entities are in an outer packaging container entity.
| (IPS...ent) |
| cs | 0 … 1 | | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.28 Quantity Units (DYNAMIC) |
|
| | 1 … 1 | R | |
| | Example | <quantity value="20" unit="{tablet}"/> |
| | Example | <quantity value="10" unit="mL"/> |
| | | | | | | pharm:containerPackagedProduct
|
| | 1 … 1 | R | It represents the intermediate Package Item or the Packaged Medicinal Product | (IPS...ent) |
| cs | 1 … 1 | F | CONT |
| cs | 1 … 1 | F | KIND |
| CD.IPS | 0 … 1 | | If this is also the most inner <pharm:containerPackagedProduct> than the <code> element can be used to convey the (IDMP) Packaged Medicinal Product ID (e.g. the IDMP PCID when it will become actually available for usage).
The presence of the PCID indicates that that element represents the "Packaged Medicinal Product".
| (IPS...ent) |
| ST | 0 … 1 | R | It represents the Name of the Package Item or of the Packaged Medicinal Product
If this is also the most inner <pharm:containerPackagedProduct> than this element can be used for the brand name.
| (IPS...ent) |
| | Example | <name>...</name> |
| CE.IPS | 1 … 1 | R | This element encodes the type of the most inner package item or of the or the Packaged Medicinal Product.
Since the EDQM Standards Terms, together with UCUM, is one of the IDMP terminologies actually available for usage, this code system has been selected as reference terminology for representing Pharmaceutical Dose forms; Packages and Route of Administration. | (IPS...ent) |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.27 Medicine Package (DYNAMIC) |
|
| PQ | 0 … 1 | | It represents the functional capacity of the container: e.g. bottle containing up to 20 tablets or ampule of 10 ml. | (IPS...ent) |
| cs | 0 … 1 | | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.28 Quantity Units (DYNAMIC) |
|
| | 1 … 1 | R | |
| | 0 … * | R | In case of multiple layers of packaging (box with 2 blisters of 20 tablets) this element is used for describing the most outer Packaged Medicinal Product Item or the Packaged Medicinal Product.
For example in the case
\--Box
\-----2 blisters
\--------20 tablets
it describes the Packaged Medicinal Product.
| (IPS...ent) |
| cs | 1 … 1 | F | CONT |
| PQ | 0 … 1 | R | The quantity which specified how many inner packaged content entities are in an outer packaging container entity.
| (IPS...ent) |
| cs | 0 … 1 | | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.28 Quantity Units (DYNAMIC) |
|
| | 1 … 1 | R | |
| | Example | <quantity value="20" unit="{tablet}"/> |
| | Example | <quantity value="10" unit="mL"/> |
| | | | | | | | | pharm:containerPackagedProduct
|
| | 1 … 1 | R | When present, it represents the Packaged Medicinal Product | (IPS...ent) |
| cs | 1 … 1 | F | CONT |
| cs | 1 … 1 | F | KIND |
| CD.IPS | 0 … 1 | | When present, it can be used to convey the (IDMP) Packaged Medicinal Product ID (e.g. the IDMP PCID when it will become actually available for usage). | (IPS...ent) |
| ST | 0 … 1 | R | When present, it can be used for the representing the brand name. | (IPS...ent) |
| CE.IPS | 1 … 1 | R | When present, it encodes the type of the outer package.
Since the EDQM Standards Terms, together with UCUM, is one of the IDMP terminologies actually available for usage, this code system has been selected as referecne terminology for representing Pharmaceutical Dose forms; Packages and Route of Administration. | (IPS...ent) |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.27 Medicine Package (DYNAMIC) |
|
| PQ | 0 … 1 | | It represents the functional capacity of the container: e.g. bottle containing up to 20 tablets or ampule of 10 ml. | (IPS...ent) |
| cs | 0 … 1 | | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.28 Quantity Units (DYNAMIC) |
|
| | 1 … 1 | R | |
| | 0 … 1 | R | This module is used for representing the classification of the Substance according to the WHO Anatomical Therapeutic Chemical (ATC) Classification System.
The classCode of "GRIC" identifies this structure as the representation of a generic equivalent of the medication described in the current Medicine entry.
| (IPS...ent) |
| where [generalizedMaterialKind/code/@codeSystem='2.16.840.1.113883.6.73'] | |
| cs | 1 … 1 | F | GRIC |
| | Example | <asSpecializedKind classCode="GRIC">
<generalizedMaterialKind classCode="MMAT">
<!-- Pharmaceutical Substance (ATC Code)-->
<code code=" " codeSystem="2.16.840.1.113883.6.73" displayName=" " codeSystemName="WHO ATC"/> </generalizedMaterialKind></asSpecializedKind> |
| | | | | pharm:generalizedMaterialKind
|
| | 1 … 1 | M | | (IPS...ent) |
| cs | 1 … 1 | F | MMAT |
| CD.IPS | 1 … 1 | R | The <code> element contains the ATC code of this medicine. | (IPS...ent) |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.29 IPS WHO ATC (DYNAMIC) |
|
| | Example | <code codeSystem="2.16.840.1.113883.6.73" code=" " displayName=" " codeSystemName="WHO ATC"/> |
| | 0 … * | | | (IPS...ent) |
| | 0 … * | R | The Medicinal Product can be classified according to various classification systems, which may be jurisdictional or international.
The classification system itself is specified using an appropriate identification system; the controlled term and the controlled term identifier shall be specified.
When the IDMP Pharmaceutical Product Identifier(s) (PhPID Set) will become actually available for use, the PhPID will be represented by the generalizedMaterialKind/code element. | (IPS...ent) |
| cs | 1 … 1 | F | GRIC |
| | Example | <asSpecializedKind classCode="GRIC">
<generalizedMaterialKind classCode="MMAT">
<code code="PhPID_Lvl1" codeSystem="1.999.999" displayName="Pharmaceutical Product Name" codeSystemName="PhPID Level 1">
<name/> </code> </generalizedMaterialKind></asSpecializedKind> |
| | | | | pharm:generalizedMaterialKind
|
| | | R | | (IPS...ent) |
| cs | 1 … 1 | F | MMAT |
| CD.IPS | 1 … 1 | R | When the IDMP Pharmaceutical Product Identifier(s) (PhPID Set) will become actually available for use, this element will be used for representing the IDMP PhP Id.
The level and the stratum of the PhPID will be distiguished by the OID of the code system.
| (IPS...ent) |
| | 0 … * | R | | (IPS...ent) |
| | 0 … * | R | This module provides the list of the ingredients (substances with a role) used for this product; one or more ingredients may be present.
The classCode of "ACTI" indicates that this is an active ingredient.
| (IPS...ent) |
| cs | 1 … 1 | R | |
| | CONF | | The value of @classCode shall be drawn from value set 2.16.840.1.113883.1.11.10430 RoleClassIngredientEntity (DYNAMIC) |
|
| | 1 … 1 | M | The medication strength is represented as the ratio of the active ingredient(s) to a unit of medication. The <quantity> element contains the numerator and denominator of the strength ratio.</quantity>
| (IPS...ent) |
| | Example | <quantity>...</quantity> |
| PQ | 1 … 1 | R | | (IPS...ent) |
| cs | 1 … 1 | R | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.30 Medicine Strength Numerator (DYNAMIC) |
|
| | 1 … 1 | R | |
| PQ | 1 … 1 | R | | (IPS...ent) |
| cs | 1 … 1 | R | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.31 Medicine Strength Denominator (DYNAMIC) |
|
| | 1 … 1 | R | |
| | | | | pharm:ingredientSubstance
|
| | 1 … 1 | R | | (IPS...ent) |
| cs | 1 … 1 | F | MMAT |
| cs | 1 … 1 | F | KIND |
| CD.IPS (extensible) | 0 … 1 | C | The IDMP ISO 11238 standard addresses the identification and exchange of regulated information on substances.
The Global Ingredient Archival System (GInAS) will provide a common global identifier for all of the substances used in medicinal products, providing a definition of substances globally consistent with this standard.
Those identifiers however are yet available for concrete usage, therefore in this version of the template, SNOMED CT has been chosen as reference terminology also for the active substances.
This choice will be revised based on the availability and the maturity of GInAS. | (IPS...ent) |
| | CONF | | The value of @code should be drawn from value set 2.16.840.1.113883.11.22.32 IPS Medicine Active Substances (DYNAMIC) |
|
| ED | 0 … * | | | (IPS...ent) |
| TEL | 0 … * | | | (IPS...ent) |
| CD | 0 … * | | This element can be used to provide alternative identifications for the described substance. | (IPS...ent) |
| | 0 … 1 | C | Name of the substance | (IPS...ent) |
| | Schematron assert | role | error | |
| | test | pharm:code or pharm:name | |
| | Message | Either the name or the code of the substance (or both) shall be provided | |
| Included | 0 … * | | from 2.16.840.1.113883.10.22.4.14 IPS Body Author (DYNAMIC) |
| hl7:author
|
| | 0 … * | | | (IPS...ent) |
| | hl7:templateId
|
| II | 1 … 1 | M | | (IPS...ent) |
| uid | 1 … 1 | F | 2.16.840.1.113883.10.22.4.14 |
| | hl7:time
|
| TS.IPS.TZ | 1 … 1 | R | | (IPS...ent) |
| | hl7:assignedAuthor
|
| | 1 … 1 | M | | (IPS...ent) |
| II | 1 … * | R | | (IPS...ent) |
| | 0 … 1 | R | | (IPS...ent) |
| Choice | 0 … 1 | | Elements to choose from:- hl7:assignedPerson
- hl7:assignedAuthoringDevice
|
| | 0 … 1 | C | | (IPS...ent) |
| cs | 0 … 1 | F | PSN |
| cs | 0 … 1 | F | INSTANCE |
| PN | 1 … * | R | Name of the person (e.g. the Healthcare Professional) authoring this document | (IPS...ent) |
| | Example | <name>
<given>John</given> <family>Español Smith</family></name> |
| | 1 … * | R | | (IPS...ent) |
| | 1 … * | R | | (IPS...ent) |
| | | | hl7:assignedAuthoringDevice
|
| | 0 … 1 | C | | (IPS...ent) |
| | Example | <assignedAuthoringDevice classCode="DEV" determinerCode="INSTANCE">
<softwareName displayName="Turriano"/></assignedAuthoringDevice> |
| Included | | | from 2.16.840.1.113883.10.22.9.2 IPS CDA Device (DYNAMIC) |
| cs | 0 … 1 | F | DEV |
| cs | 0 … 1 | F | INSTANCE |
| CE | 0 … 1 | | | (IPS...ent) |
| | | | | hl7:manufacturerModelName
|
| SC | 0 … 1 | | | (IPS...ent) |
| SC | 0 … 1 | | | (IPS...ent) |
| | | hl7:representedOrganization
|
| | 0 … 1 | | | (IPS...ent) |
| II | 0 … * | | | (IPS...ent) |
| | 0 … * | | | (IPS...ent) |
| TEL | 0 … * | | | (IPS...ent) |
| AD | 0 … * | | | (IPS...ent) |
| hl7:entryRelationship
|
| | 0 … * | C | Subordinate Substance Administration Statement as a component of the overall medication statement.
Unless medications are unknown or known absent, at least one subordinated <substanceAdministration> has to be present to convey information about dosages (dose, frequency of intakes,..).
Subordinated <substanceAdministration> elements can be also used either to handle split dosing, or to support combination medications.
Contains 2.16.840.1.113883.10.21.4.6 UV Subordinate Substance Administration (DYNAMIC) | (IPS...ent) |
| | @typeCode
|
| cs | 1 … 1 | F | COMP |
| | Constraint | At least one subordinate <substanceAdministration> element SHALL be present unless medications are unknown or known absent. </substanceAdministration>
|
| | Example | <hl7:entryRelationship typeCode="COMP">
<!-- component: Subordinate Substance Administration Statement. -->
<hl7:substanceAdministration classCode="SBADM" moodCode="EVN">
<hl7:templateId root="2.16.840.1.113883.10.22.4.33"/> <!-- .. -->
</hl7:substanceAdministration> <hl7:sequenceNumber value="1"/></hl7:entryRelationship> |
| | hl7:sequenceNumber
|
| INT | 0 … 1 | | Sequence number of the Subordinate Substance Administration | (IPS...ent) |
Draft
