| Item | DT | Card | Conf | Description | Label |
|---|
hl7:substanceAdministration
|
| | | R | | (IPSMedi… |
 | @classCode
|
| cs | 1 … 1 | F | SBADM |
| @moodCode
|
| cs | 1 … 1 | R | If the statement refers to a prescribed medication then a <substanceAdministration> intent (moodCode='INT') is used; otherwise, to record medications which are stated to have taken, the moodCode shall be set to 'EVN'. |
| | CONF | | The value of @moodCode shall be drawn from value set 2.16.840.1.113883.11.20.9.18 MoodCodeEvnInt (DYNAMIC) |
|
| hl7:templateId
|
| II | 1 … 1 | M | | (IPSMedi… |
 | | @root
|
| uid | 1 … 1 | F | 2.16.840.1.113883.10.22.4.4 |
| hl7:id
|
| II | 0 … * | R | | (IPSMedi… |
| hl7:code
|
| CD.IPS | 1 … 1 | R | The <code> element is valorized with the Substance Administration ACT code "DRUG" unless it is used for asserting the known absence of medication treatments or no information about them. | (IPSMedi… |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.14 DRUGActCode (2017‑04‑01) | | or | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.15 Absent or Unknown Medication (2017‑04‑01) |
|
| hl7:text
|
| ED | 0 … 1 | R | The URI given in the value attribute of the <reference> element points to an element in the narrative content that contains the complete text describing the medication. In a CDA document, the URI given in the value attribute of the <reference> element points to an element in the narrative content that contains the complete text describing the medication. | (IPSMedi… |
| | hl7:reference
|
| TEL | 1 … 1 | M | | (IPSMedi… |
| | 1 … 1 | R | Reference pointing to the narrative, typically #{label}-{generated-id}, e.g. #xxx-1 |
| hl7:statusCode
|
| CS | 1 … 1 | M | | (IPSMedi… |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.12 ActStatusActiveCompletedAbortedSuspended (2017‑03‑30) |
|
| | Example | <statusCode code="active"/> |
| Choice | 1 … 1 | | The <effectiveTime> element encodes the period of administration of the medication, it is always expressed as an interval of time.
It may be expressed using the <low> and <high> OR with the <width> element.
The first is used to indicate a specified interval (e.g. from march 15th, 2017); the latter for indicating a 'floating' period (e.g. 2 weeks) . Elements to choose from:- hl7:effectiveTime[hl7:low | hl7:high]
- hl7:effectiveTime[hl7:width]
|
| | hl7:effectiveTime
|
| IVL_TS | 0 … 1 | C | Case 1: specified interval
The <low> and <high> values of the first <effectiveTime> element represent the start and stop times for the medication. The <low> value represents the start time, and the <high> value represents the stop time. If either the <low> or the <high> value is unknown, this shall be recorded by setting the nullFlavor attribute to UNK.
In case of unbounded period (continous terapy) the <high> element will be valued with the nullFlavor attribute to NA.
The <high> value records the end of the medication regime according to the information provided in the prescription or order. For example, if the prescription is for enough medication to last 30 days, then the high value should contain a date that is 30 days later then the <low> value. The rationale is that a provider, seeing an un-refilled prescription would normally assume that the medication is no longer being taken, even if the intent of the treatment plan is to continue the medication indefinitely.
| (IPSMedi… |
| | where [hl7:low or
hl7:high] |
| |
| cs | 0 … 1 | | |
| | Example | Known Interval <effectiveTime xsi:type="IVL_TS">
<low value="20130321"/> <high value="20140321"/></effectiveTime> |
| | Example | Information not available about the period <effectiveTime xsi:type="IVL_TS" nullFlavor="NI"/> |
| | Example | Unknown end date <effectiveTime xsi:type="IVL_TS">
<low value="20130321"/> <high nullFlavor="UNK"/></effectiveTime> |
| | Example | Continuous terapy <effectiveTime xsi:type="IVL_TS">
<low value="20130321"/> <high nullFlavor="NA"/></effectiveTime> |
| IVXB_TS | 1 … 1 | R | | (IPSMedi… |
| IVXB_TS | 0 … 1 | R | | (IPSMedi… |
| | hl7:effectiveTime
|
| IVL_TS | 0 … 1 | C | Case 2: 'floating' period
The width element is used to specify a period of (actual or intended) administration that is not anchored to any specific date (e.g. a two weeks therapy.....) | (IPSMedi… |
| | where [hl7:width] |
| |
| | Example | 2 week period <effectiveTime xsi:type="IVL_TS">
<width value="2" unit="w"/></effectiveTime> |
| PQ | 1 … 1 | R | | (IPSMedi… |
| cs | 1 … 1 | R | |
| | CONF | | The value of @unit shall be drawn from value set 2.16.840.1.113883.11.22.13 Time units (UCUM) (2017‑04‑01) |
|
| hl7:routeCode
|
| CE.IPS | 0 … 1 | R | The <routeCode> element specifies the route of administration using the EDQM route of administration vocabulary.
A code must be specified if the route is known.
Since the EDQM Standards Terms, together with UCUM, is one of the IDMP terminologies actually available for usage, this code system has been selected as referecne terminology for representing Pharmaceutical Dose forms; Packages and Route of Administration.
It is known that also alternative jurisdictional and international terminologies are also used for this concept domain, as NCI or SNOMED CT.
Official NCI and EDQM maps for the route of administration are available from the EDQM site. | (IPSMedi… |
| | CONF | | The value of @code shall be drawn from value set 2.16.840.1.113883.11.22.33 Medicine Route of Administration (2017‑05‑10) |
|
| hl7:doseQuantity
|
| IVL_PQ | | NP | | (IPSMedi… |
| hl7:consumable
|
| | 1 … 1 | R | Contains 2.16.840.1.113883.10.22.4.2 IPS ManufacturedProduct (DYNAMIC) | (IPSMedi… |
| | @typeCode
|
| cs | 1 … 1 | F | CSM |
| hl7:author
|
| | 0 … * | | Contains 2.16.840.1.113883.10.22.4.14 IPS Body Author (2017‑03‑02) | (IPSMedi… |
| hl7:entryRelationship
|
| | 0 … * | C | Unless medications are unknown or known absent, at least one subordinated <substanceAdministration> has to be present to convey information about dosages (dose, frequency of intakes,..).
Subordinated <substanceAdministration> elements can be also used either to handle split dosing, or to support combination medications.
Contains 2.16.840.1.113883.10.22.4.33 IPS Subordinate SubstanceAdministration (DYNAMIC) | (IPSMedi… |
| | @typeCode
|
| cs | 1 … 1 | F | COMP |
| | Constraint | At least one subordinate <substanceAdministration> element SHALL be present unless medications are unknown or known absent.
|
| | hl7:sequenceNumber
|
| INT | 0 … 1 | | | (IPSMedi… |
Draft
