2.16.840.1.113883.10.21.4.11/static-2021-08-04T123904

Id	2.16.840.1.113883.10.21.4.11	Effective Date	2021‑08‑04 12:39:04 Other versions this id: UVMedicationInformationdetail as of 2023‑02‑03 13:03:38 UVMedicationInformationdetail as of 2017‑05‑10
Status	Under pre-publication review	Version Label	R1-STU2-ballot
Name	UVMedicationInformationdetail	Display Name	UV Medication Information (detail)
Description	Universal Medication Information (detail)
Context	Parent nodes of template element with id 2.16.840.1.113883.10.21.4.11
Classification	CDA Entry Level Template
Open/Closed	Open (other than defined elements are allowed)
Uses	Uses 4 templates Uses as Name Version 2.16.840.1.113883.10.21.4.17 Include UV Content (R1-STU2-ballot) DYNAMIC 2.16.840.1.113883.10.21.4.19 Include UV Generalized Medicine Class (2023) DYNAMIC 2.16.840.1.113883.10.21.4.18 Include UV Ingredient (R1-STU2-ballot) DYNAMIC 2.16.840.1.113883.10.12.151 Containment CDA Organization DYNAMIC
Relationship	Version: template 2.16.840.1.113883.10.21.4.11 UV Medication Information (detail) (2017‑05‑10) Specialization: template 2.16.840.1.113883.10.12.312 CDA ManufacturedProduct (2005‑09‑07) ref ad1bbr- Adaptation: template 1.3.6.1.4.1.19376.1.9.1.3.1 IHE MedicineEntryContentModule (DYNAMIC) ref ch-pharm-
Item DT Card Conf Description Label hl7:manufacturedProduct (UVM...ail) @classCode cs 1 … 1 F MANU hl7:templateId II 1 … 1 M (UVM...ail) @root uid 1 … 1 F 2.16.840.1.113883.10.21.4.11 hl7:manufactured​Material (UVM...ail) @classCode cs 0 … 1 F MMAT @determiner​Code cs 0 … 1 F KIND hl7:code CE 0 … 1 R The code describes the code of the medication. The medication may be either a brand/product or described as a generic/scientific name or a descriptor of a magistral preparation/compound medicine (UVM...ail) hl7:originalText ED 0 … 1 R The originalText shoud contain a reference whose URI value points to the name and strength of the medication in the corresponding section.text, or just the name alone if strength is not relevant. (UVM...ail) hl7:reference TEL 1 … 1 R (UVM...ail) hl7:translation CE 0 … * Product code(s) from any organizational or juristdictional system (UVM...ail)   CONF shall be drawn from concept domain "Product Code" hl7:name EN 0 … 1 R The element SHOULD contain the name of the medication (e.g., "Adol 500mg Caplet"). The medication may be either a brand/product or described as a generic/scientific name or a descriptor of a magistral preparation/compound medicine (UVM...ail) pharm:formCode CE 0 … 1 This code represents the pharmaceutical dose form (e.g., tablet, capsule, liquid) and SHOULD be present, if not implied by the product. It MAY be present if implied by the product. The value of this code may affect the units used in the substance administration quantity element. (UVM...ail) hl7:lotNumberText ST 0 … 1 The lotNumberText element MAY be present and is a string representation of a lot number of this specific instance of the product. The provided lot number SHALL refer to the primary packaged item described in the Packaging element. (UVM...ail) pharm:expirationTime TS 0 … 1 The pharm:expirationTime element MAY be present and SHALL contain a value attribute containing the date (e.g., specific date, specific date including time) of expiration of this specific instance of the product. The value given in the pharm:expirationTime element SHALL refer to the primary packaged item described in the Medicine Packaging element. (UVM...ail) @value 1 … 1 R pharm:asContent 0 … * This structure describes the packaging of the medication. It represents the primary description of the packaging of the medicine (e.g., the medicine is packaged in ampoules of 50ml volume each) and may include additional packaging information of how many of the primary packaged items are within an outer package (e.g., 5 ampoules are packaged in a box). The primary description of the package should be consistent with the given pharmaceutical dose form (pharm:formCode of the medication). Example: a consistent pharmaceutical dose form to the package form “Ampoules” would be e.g., “Solution for injection”. In case the package describes a product, the pharm:code element provides the code for the product. In case the package describes a product, and the package has a brand name, it should be described in the pharm:name element (e.g., Xylocaine 1% with Adrenaline Inj, 5 injections package). The pharm:formCode element represents the form of the product/contaner (e.g., tablet container, bottle, ...). The <pharm:capacity​Quantity> element describes the capacity of the packaging, while the <pharm:quantity> the actual quantity of inner packaged items in the outer packaging container. The product might have a single (30 pills bottle) or multiple (5 vials 10 ml; box with 2 blisters of 20 tablets) layers of packaging. In the latter case, the most inner (nested) item represents the most outer package item. For example the case    \--Box    \-----2 blisters    \--------20 tablets  is described as "20 tablets" contained by "a blister"; "2 blisters" contained by one box. The most inner package represents the Packaged Medicinal Product. (UVM...ail) @classCode cs 1 … 1 F CONT   Example Packaged Medicinal Product with formCode <pharm:asContent classCode="CONT">   <pharm:containerPackagedProduct classCode="CONT" determinerCode="KIND">     <!-- Packaged Medicinal Product -->     <pharm:code codeSystem="1.999.999" code="PC_ID" displayName="Packaged Product Name"/>    <pharm:name>100 MIRACLE PILLS(TM)</pharm:name>    <pharm:formCode codeSystem="0.4.0.127.0.16.1.1.2.1" code="30009000" displayName="Box" CodeSystemName="EDQM"/>  </pharm:containerPackagedProduct></pharm:asContent>   Example General example <pharm:asContent classCode="CONT">   <pharm:quantity value=" " unit=" "/>  <pharm:containerPackagedProduct classCode="CONT" determinerCode="KIND">     <!-- Medicinal product code (package-level) -->     <pharm:code code=" " displayName=" " codeSystem=" " codeSystemName=" "/>    <!-- Brand name (package) -->     <pharm:name> . . . </pharm:name>    <pharm:formCode code=" " displayName=" " codeSystem=" " codeSystemName=" "/>    <pharm:capacityQuantity value=" " unit=" "/>    <pharm:asContent>       <pharm:containerPackagedProduct classCode="CONT" determinerCode="KIND">         <pharm:capacityQuantity value=" " unit=" "/>      </pharm:containerPackagedProduct>    </pharm:asContent>  </pharm:containerPackagedProduct></pharm:asContent>   Example Medicinal product with pharmaceutical dose form ”Tablets”, available as a “Tablet container” with 30 tablets <pharm:asContent classCode="CONT">   <!-- 30 tablets in the package -->   <pharm:quantity value="30" unit="{tablet}"/>  <pharm:containerPackagedProduct classCode="CONT" determinerCode="KIND">     <!-- .. -->     <pharm:formCode code=" " displayName="Tablet container" codeSystem=" " codeSystemName=" "/>  </pharm:containerPackagedProduct></pharm:asContent>   Example Medicinal product with pharmaceutical dose form 'Solution for injection', available as “Ampoules” with 50ml volume, packaged as 5 ampoules per box <pharm:asContent classCode="CONT">   <pharm:quantity value="50" unit="ml"/>  <!-- 50ml per ampoule -->   <pharm:containerPackagedProduct classCode="CONT" determinerCode="KIND">     <!-- .. -->     <pharm:formCode code=" " displayName="Ampoules" codeSystem=" " codeSystemName=" "/>    <pharm:asContent>       <!-- 5 ampoules in a box -->       <pharm:quantity value="5"/>      <pharm:containerPackagedProduct classCode="CONT" determinerCode="KIND">         <!-- .. -->       </pharm:containerPackagedProduct>    </pharm:asContent>  </pharm:containerPackagedProduct></pharm:asContent>   Example Packaged Medicinal Product with multiple layers packaging <pharm:asContent classCode="CONT">   <pharm:containerPackagedProduct>     <!-- Inner Package -->     <pharm:code codeSystem="..." code="..." displayName="..."/>    <pharm:asContent>       <pharm:containerPackagedProduct>         <!-- Intermediate Package -->         <pharm:asContent>           <pharm:containerPackagedProduct>             <!-- Outer Package / Packaged Medicinal Product -->           </pharm:containerPackagedProduct>        </pharm:asContent>      </pharm:containerPackagedProduct>    </pharm:asContent>  </pharm:containerPackagedProduct></pharm:asContent> Included from 2.16.840.1.113883.10.21.4.17 UV Content (DYNAMIC) pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CE 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name EN 0 … * It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 0 … 1 This element encodes the type of the most inner package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * In case of multiple layers of packaging (5 vials 10 ml; box with 2 blisters of 20 tablets) this element can be used for describing the intermediate Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the "2 blisters"  In the case of    \--Box    \-----5 vials it represents the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R It represents the intermediate Package Item or the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 1 … 1 R This element encodes the type of the intermediate package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * R In case of multiple layers of packaging (box with 2 blisters of 20 tablets) this element is used for describing the most outer Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R (UVM...ail) pharm:containerPackagedProduct 1 … 1 R When present, it represents the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 When present, it can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R (UVM...ail) pharm:formCode CE 1 … 1 R (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asSpecializedKind 0 … * R The Medicinal Product can be classified according to various classification systems, which may be jurisdictional or international as for example  the WHO ATC drug code, or the IDMP Pharmaceutical Product Identifier(s) (PhPID Set) when it will be available for use. The generalizedMaterialKind/code element is used to covey these codes. (UVM...ail) @classCode cs 1 … 1 F GRIC   Example <pharm:asSpecializedKind classCode="GRIC">   <pharm:generalizedMedicineKind classCode="MMAT" determinerCode="KIND">     <pharm:code code=" " displayName=" " codeSystem=" " codeSystemName=" "/>  </pharm:generalizedMedicineKind></pharm:asSpecializedKind> Included from 2.16.840.1.113883.10.21.4.19 UV Generalized Medicine Class (DYNAMIC) pharm:generalizedMedicineKind 0 … * (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code 1 … 1 R (UVM...ail) pharm:name 0 … * (UVM...ail) pharm:part 0 … * (UVM...ail) @classCode cs 1 … 1 F PART pharm:id II 0 … 1 (UVM...ail) pharm:quantity PQ 0 … 1 (UVM...ail) pharm:partProduct 1 … 1 (UVM...ail) pharm:asContent 0 … * (UVM...ail) @classCode cs 1 … 1 F CONT Included from 2.16.840.1.113883.10.21.4.17 UV Content (DYNAMIC) pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CE 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name EN 0 … * It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 0 … 1 This element encodes the type of the most inner package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * In case of multiple layers of packaging (5 vials 10 ml; box with 2 blisters of 20 tablets) this element can be used for describing the intermediate Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the "2 blisters"  In the case of    \--Box    \-----5 vials it represents the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R It represents the intermediate Package Item or the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 1 … 1 R This element encodes the type of the intermediate package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * R In case of multiple layers of packaging (box with 2 blisters of 20 tablets) this element is used for describing the most outer Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R (UVM...ail) pharm:containerPackagedProduct 1 … 1 R When present, it represents the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 When present, it can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R (UVM...ail) pharm:formCode CE 1 … 1 R (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asSpecializedKind 0 … * (UVM...ail) @classCode cs 1 … 1 F GRIC Included from 2.16.840.1.113883.10.21.4.19 UV Generalized Medicine Class (DYNAMIC) pharm:generalizedMedicineKind 0 … * (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code 1 … 1 R (UVM...ail) pharm:name 0 … * (UVM...ail) pharm:part 0 … * (UVM...ail) @classCode cs 1 … 1 F PART pharm:id II 0 … 1 (UVM...ail) pharm:quantity PQ 0 … 1 (UVM...ail) pharm:partProduct 1 … 1 (UVM...ail) pharm:asContent 0 … * (UVM...ail) @classCode cs 1 … 1 F CONT Included from 2.16.840.1.113883.10.21.4.17 UV Content (DYNAMIC) pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CE 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name EN 0 … * It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 0 … 1 This element encodes the type of the most inner package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * In case of multiple layers of packaging (5 vials 10 ml; box with 2 blisters of 20 tablets) this element can be used for describing the intermediate Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the "2 blisters"  In the case of    \--Box    \-----5 vials it represents the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R It represents the intermediate Package Item or the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 1 … 1 R This element encodes the type of the intermediate package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * R In case of multiple layers of packaging (box with 2 blisters of 20 tablets) this element is used for describing the most outer Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R (UVM...ail) pharm:containerPackagedProduct 1 … 1 R When present, it represents the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 When present, it can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R (UVM...ail) pharm:formCode CE 1 … 1 R (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asSpecializedKind 0 … * (UVM...ail) @classCode cs 1 … 1 F GRIC Included from 2.16.840.1.113883.10.21.4.19 UV Generalized Medicine Class (DYNAMIC) pharm:generalizedMedicineKind 0 … * (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code 1 … 1 R (UVM...ail) pharm:name 0 … * (UVM...ail) pharm:part 0 … * (UVM...ail) @classCode cs 1 … 1 F PART pharm:id II 0 … 1 (UVM...ail) pharm:quantity PQ 0 … 1 (UVM...ail) pharm:partProduct 1 … 1 (UVM...ail) pharm:asContent 0 … * (UVM...ail) @classCode cs 1 … 1 F CONT Included from 2.16.840.1.113883.10.21.4.17 UV Content (DYNAMIC) pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CE 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name EN 0 … * It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 0 … 1 This element encodes the type of the most inner package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * In case of multiple layers of packaging (5 vials 10 ml; box with 2 blisters of 20 tablets) this element can be used for describing the intermediate Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the "2 blisters"  In the case of    \--Box    \-----5 vials it represents the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R The quantity which specified how many inner packaged content entities are in an outer packaging container entity. (UVM...ail) pharm:containerPackagedProduct 1 … 1 R It represents the intermediate Package Item or the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 It represents the code of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R It represents the Name of the Package Item or of the Packaged Medicinal Product. If this is also the most outer <pharm:containerPackagedProduct> than this element can be used for the brand name. (UVM...ail) pharm:formCode CE 1 … 1 R This element encodes the type of the intermediate package item or of the or the Packaged Medicinal Product. (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asContent 0 … * R In case of multiple layers of packaging (box with 2 blisters of 20 tablets) this element is used for describing the most outer Packaged Medicinal Product Item or the Packaged Medicinal Product. For example in the case    \--Box    \-----2 blisters    \--------20 tablets  it describes the Packaged Medicinal Product.  (UVM...ail) @classCode cs 1 … 1 F CONT pharm:quantity PQ 0 … 1 R (UVM...ail) pharm:containerPackagedProduct 1 … 1 R When present, it represents the Packaged Medicinal Product (UVM...ail) @classCode cs 1 … 1 F CONT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 When present, it can be used to convey the Packaged Medicinal Product ID. (UVM...ail) pharm:name ST 0 … 1 R (UVM...ail) pharm:formCode CE 1 … 1 R (UVM...ail) pharm:capacity​Quantity PQ 0 … 1 Captures the number of product units the package would contain if fully loaded. (UVM...ail) @value 1 … 1 R @unit cs 0 … 1   pharm:asSpecializedKind 0 … * (UVM...ail) @classCode cs 1 … 1 F GRIC Included from 2.16.840.1.113883.10.21.4.19 UV Generalized Medicine Class (DYNAMIC) pharm:generalizedMedicineKind 0 … * (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code 1 … 1 R (UVM...ail) pharm:name 0 … * (UVM...ail) pharm:part 0 … * (UVM...ail) @classCode cs 1 … 1 F PART pharm:ingredient 0 … * (UVM...ail) @classCode cs 1 … 1 R   CONF The value of @classCode shall be drawn from value set 2.16.840.1.113883.1.11.10430 RoleClassIngredientEntity (DYNAMIC) Included from 2.16.840.1.113883.10.21.4.18 UV Ingredient (DYNAMIC) pharm:quantity RTO_PQ_PQ 0 … 1 (UVM...ail)   Example 10 mg of the ingredient per ml <pharm:quantity>   <numerator xsi:type="PQ" value="10" unit="mg"/>  <denominator xsi:type="PQ" value="1" unit="ml"/></pharm:quantity>   Example 2% of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="2" unit="%"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity>   Example 5mg of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="5" unit="mg"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity> numerator PQ 0 … 1 (UVM...ail) denominator PQ 0 … 1 (UVM...ail) pharm:ingredientSubstance 0 … 1 The substance used for this product plying the role indicated in the ingredient classCode. The <code> element contains the coded representation of the ingredient and the <name> element may be used for the plain text representation. (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 C (UVM...ail) pharm:name EN 0 … 1 C (UVM...ail)   Schematron assert role  error     test pharm:code or pharm:name     Message Either the name or the code of the substance (or both) shall be provided   pharm:ingredient 0 … * (UVM...ail) @classCode cs 1 … 1 R   CONF The value of @classCode shall be drawn from value set 2.16.840.1.113883.1.11.10430 RoleClassIngredientEntity (DYNAMIC) Included from 2.16.840.1.113883.10.21.4.18 UV Ingredient (DYNAMIC) pharm:quantity RTO_PQ_PQ 0 … 1 (UVM...ail)   Example 10 mg of the ingredient per ml <pharm:quantity>   <numerator xsi:type="PQ" value="10" unit="mg"/>  <denominator xsi:type="PQ" value="1" unit="ml"/></pharm:quantity>   Example 2% of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="2" unit="%"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity>   Example 5mg of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="5" unit="mg"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity> numerator PQ 0 … 1 (UVM...ail) denominator PQ 0 … 1 (UVM...ail) pharm:ingredientSubstance 0 … 1 The substance used for this product plying the role indicated in the ingredient classCode. The <code> element contains the coded representation of the ingredient and the <name> element may be used for the plain text representation. (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 C (UVM...ail) pharm:name EN 0 … 1 C (UVM...ail)   Schematron assert role  error     test pharm:code or pharm:name     Message Either the name or the code of the substance (or both) shall be provided   pharm:ingredient 0 … * (UVM...ail) @classCode cs 1 … 1 R   CONF The value of @classCode shall be drawn from value set 2.16.840.1.113883.1.11.10430 RoleClassIngredientEntity (DYNAMIC) Included from 2.16.840.1.113883.10.21.4.18 UV Ingredient (DYNAMIC) pharm:quantity RTO_PQ_PQ 0 … 1 (UVM...ail)   Example 10 mg of the ingredient per ml <pharm:quantity>   <numerator xsi:type="PQ" value="10" unit="mg"/>  <denominator xsi:type="PQ" value="1" unit="ml"/></pharm:quantity>   Example 2% of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="2" unit="%"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity>   Example 5mg of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="5" unit="mg"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity> numerator PQ 0 … 1 (UVM...ail) denominator PQ 0 … 1 (UVM...ail) pharm:ingredientSubstance 0 … 1 The substance used for this product plying the role indicated in the ingredient classCode. The <code> element contains the coded representation of the ingredient and the <name> element may be used for the plain text representation. (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 C (UVM...ail) pharm:name EN 0 … 1 C (UVM...ail)   Schematron assert role  error     test pharm:code or pharm:name     Message Either the name or the code of the substance (or both) shall be provided   pharm:ingredient 0 … * This module provides the list of the ingredients (substances with a role) used for this product; one or more ingredients may be present. The classCode of "ACTI" indicates that this is an active ingredient. (UVM...ail) @classCode cs 1 … 1 R   CONF The value of @classCode shall be drawn from value set 2.16.840.1.113883.1.11.10430 RoleClassIngredientEntity (DYNAMIC)   Example <pharm:ingredient classCode="ACTI">   <pharm:quantity>     <numerator xsi:type="PQ" value=" " unit=" "/>    <denominator xsi:type="PQ" value=" " unit=" "/>  </pharm:quantity>  <pharm:ingredientSubstance classCode="MMAT" determinerCode="KIND">     <pharm:code code=" " displayName=" " codeSystem="2.16.840.1.113883.6.73" codeSystemName="ATC WHO"/>  </pharm:ingredientSubstance></pharm:ingredient> Included from 2.16.840.1.113883.10.21.4.18 UV Ingredient (DYNAMIC) pharm:quantity RTO_PQ_PQ 0 … 1 (UVM...ail)   Example 10 mg of the ingredient per ml <pharm:quantity>   <numerator xsi:type="PQ" value="10" unit="mg"/>  <denominator xsi:type="PQ" value="1" unit="ml"/></pharm:quantity>   Example 2% of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="2" unit="%"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity>   Example 5mg of the ingredient <pharm:quantity>   <numerator xsi:type="PQ" value="5" unit="mg"/>  <denominator xsi:type="PQ" value="1"/></pharm:quantity> numerator PQ 0 … 1 (UVM...ail) denominator PQ 0 … 1 (UVM...ail) pharm:ingredientSubstance 0 … 1 The substance used for this product plying the role indicated in the ingredient classCode. The <code> element contains the coded representation of the ingredient and the <name> element may be used for the plain text representation. (UVM...ail) @classCode cs 1 … 1 F MMAT @determiner​Code cs 1 … 1 F KIND pharm:code CD 0 … 1 C (UVM...ail) pharm:name EN 0 … 1 C (UVM...ail)   Schematron assert role  error     test pharm:code or pharm:name     Message Either the name or the code of the substance (or both) shall be provided   hl7:manufacturerOrganization 0 … 1 R Contains 2.16.840.1.113883.10.12.151 CDA Organization (DYNAMIC) (UVM...ail)